BioGeometry Energy Balancing Home Kit (1 cube)

The BioGeometry Home Energy-Balancing Kit was developed and tested as an individual home solution, to be used to reduce the symptoms suffered from environmental stress.

The 1 cube home kit covers an area of approximately 3000 sq. ft. (280 m²)

————————————————————————————————————–

The 1 Cube Home Energy Balancing Kit includes the following:

1 x Home Energy-Balancing Cube.

1 x BioGeometry Clearing Tray

3 x Electricity Attachments. ( labeled with E )

1 x 16/19 attachment ( labeled with E.P. )

2 x Water Attachments (labeled with W)

8 x L90 Stickers

Instructions for use:

Home Energy-Balancing Cube

Place the cube in the home on a light-colored surface or plain white sheet of paper with the text on the bottom. Try tokeep a 10 cm radius of empty space around the cube . -Ideally, the cube would be placed on a small side table on its own so as not accidentally place objects near it thus reducing its effect.

Avoid placing the Cubes on top of or beside electrical appliances, in front of mirrors, inside closed drawers, or near large metal objects.

The cube should be placed on the accompanying BioGeometry Clearing Tray for 5 minutes every day, (if it is forgotten on the tray it’s not a problem but it is not working at its fullest while on the clearing tray). It is recommended to clear the cube right before bedtime every night.

*Note that if adding any additional cubes, they need to be a minimum of 15 meters apart for the best effect.

 Water Attachments

Place one water attachment on the main water pipe entering the home and the second on the hot water pipe using double sided tape or plastic cable ties.

Electricity Attachments

One electricity attachment should be placed on the main circuit breaker panel and using double sided tape. If applicable, an additional attachment can be placed on the home’s on the electricity meter. Do not cover the attachments with any kind of packing tape.

In addition to the E attachment, one 16/19 (E.P.) attachment should also be placed on the panel.

Any extra E attachments can be attached to electrical wires beside the bed and any other devices around the house using plastic cable ties.

Accompanying L90 Stickers

2 x L90 stickers should be placed on the home’s Wi-Fi router. No specific orientation is needed.

1 x L90 sticker should be placed on the homes smart meter if applicable

1 x L90 should be placed on a window on each of the 4 sides of the home (total 4)

Additional L90 stickers can be placed on the TV, wireless devices in the home, and on mirrors.

BioGeometry is not a form of medical diagnosis or treatment but is a long-term environmental support for the body’s energy system and all types of treatment. Under no circumstances should BioGeometry products replace professional medical treatment.